World Leader in Urban Domain Infrastructure

Call Us : +971 4 2227325
Lab23

Onda Ashtray

The ONDA ashtray is made of steel EN10111DD11, T. 20/10.

Description

Details

The ONDA ashtray is made of steel EN10111DD11, T. 20/10.

The upper part consists of a curved sheet plate and fixed to the main body through a continuous wire welding. On the frontal side is welded a pierced steel EN10111DD11 net at an inclination of 50 degrees, 180x H 120 mm, with holes with a diameter of 3 mm. On this net there are 5 laser cut openings, Ø 20 mm, under which a slot (dimensions 140x10 mm) serves to catch the ashes. The lower part is provided with a door, 220x H 500, where the hinges are obtained from the sheet plate of the bearing structure, fixing the M5 screws. Inside the ONDA ash tray is placed a galvanised steel EN10346DX51D+Z sheet plate, T. 0,8/10, provided with 2 oval holes 100x H 35. On the bottom of the ash tray there are four holes, Ø 10 mm, for eventual ground fixing through appropriate bolts. All the steel elements are then cold galvanised and polyester powder coated.

Specifications

Specifications

Colors:

Options
    Colors:
  • Graphite Gray
  • Light blue
  • Magenta
  • Orange
  • Red
  • White
  • Yellow

Max dimensions:

Height: 955 mm
Length: 250 mm
Width: 250 mm

Dimensions inner container:

Height: 450 mm
Length: 210 mm
Width 210 mm